Guenadi N Jilevski's Oracle BLOG


Oracle 11g New Feature: Database Replay

Oracle 11g New Feature: Database Replay

Database Replay:

In critical production systems, before making changes to the environment( Hardware or software related), lots of testing is required in test systems to know the effect of those changes and this usually takes lots of time to test for the stability and effects of the change.

In Oracle 11g this process is simplified and a new feature “database replay” is added which can be used to simulate the production workload on a test system.

Following are the three stages of DATABASE REPLAY:
1. Workload Capture
2. Workload Preprocessing
3. Workload Replay

1. Workload Capture:

Before starting the capture process you need to take care of following things:

Login as sys user

It is always recommened (not mandatory) to shutdown the database and then start the database in restricted mode. By doing so, you will be making sure that no transactions are running on the database before capture process is actually started. It will guarantee the complete workload capture and you will be running full transactions during database replay on test system.
If you do not follow this step then you have to be prepared for some divergance of results during database replay on test system.

SQL> shutdown immediate

Database closed.

Database dismounted.

ORACLE instance shut down.

SQL> startup restrict

ORACLE instance started.

Total System Global Area  313860096 bytes

Fixed Size                  1299624 bytes

Variable Size             184552280 bytes

Database Buffers          121634816 bytes

Redo Buffers                6373376 bytes

Database mounted.

Database opened.

SQL > select LOGINS from v$instance;




Important thing to note here is that, after starting the capture process the database will automatically be switched into UNRESTRICTED mode and the users will be able to connect normally.

After capturing the initial database information, the capture process will internally fire a statement to disable restricted sessions, this can be verified by setting 10046 trace before starting the capture process as:

SQL > alter session set events ‘10046 trace name context forever, level 4’;

Now start the capture process.

SQL > alter session set events ‘10046 trace name context off’

You will see following information:

PARSING IN CURSOR #21 len=39 dep=1 uid=0 oct=49 lid=0 tim=121695902847 hv=14656808 ad=’0′ sqlid=’7shphjbg23h8′

alter system disable restricted session


PARSE #21:c=0,e=6,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=0,tim=121695384843

Now check the information from database:

SQL > select LOGINS from v$instance;




– Create a directory to hold the workload information.

SQL > create directory DIR as ‘/tmp/ss’;

Check the permission of directory ss at OS level and make sure that oracle is able to write to this directory.
Also make sure that the directory is empty, before starting the capture process.

– Define Workload Filters
By adding filters we can restrict the Workload Capture process to be specific to certain user sessions. By default all the sessions will be captured.

There are two types of filters i.e INCLUDE and EXCLUDE.

If INCLUDE is used then the filter will be active and workload for the objects mentioned in the filter will not be captured rather all other user’s workload Will be captured i.e the objects defined in the filter will be FILTERED OUT from capture process.

If EXCLUDE is used, only the workload done by objects defined in the filter will be captured, no other client request to database will be captured.


SQL > exec dbms_workload_capture.ADD_FILTER( fname  IN VARCHAR2, fattribute  IN VARCHAR2,fvalue IN VARCHAR2);

fname=Name of the filter.
fattribute=Attribute on which the filter will be applied i.e USER, PROGRAM, INSTANCE_NUMBER etc.
fvalue= value for the corresponding attribute.

SQL > exec dbms_workload_capture.ADD_FILTER( fname =>’FILTER_SCOTT’,fattribute => ‘USER’,fvalue => ‘SCOTT’);

– Starting workload capture:

To start the workload capture START_CAPTURE procedure is used as:

SQL > exec dbms_workload_capture.start_capture(NAME => ‘PEAK_LOAD_TEST’,DIR => ‘DIR’, DURATION => 600);

Name,Dir are mandatory parameters while duration (in seconds) is optional, here the capture will run for 600 seconds, if the duration is not specified then you have to finish the capture manually as:

SQL > dbms_workload_capture.finish_capture();

– While the capture process is runnig it will generate two files : wcr_scapture.wmd and wcr_cap_000xx.start

– After using the finish_capture procedure you will get folloing files also: wcr_cr.html and wcr_cr.text

wcr_cr.html is similar to the AWR report generated by awrrpt.sql

During capture process database initiate a AWR report for the duration of capture period.

SQL>  select id,AWR_BEGIN_SNAP,AWR_END_SNAP from dba_workload_captures;


———- ————– ————

1             20           21

2             29           30

– Exporting AWR data for the workload capture:

It will enable detailed analysis of the workload:


After this you can see two more files generated under the specified directory:

wcr_ca.dmp and wcr_ca.log

2. Workload Preprocessing:

Once the workload is captured it can be replayed on the test system. For this you need to copy the capture files to the test system. Preprocessing a workload will convert the captured files into REPLAY files and create the necessary metadata for this. Preprocessing will put load on the system and is resource intensive and should be performed only on test systems and on the same version of oracle database.

– Create a new directory for the capture files placed on the test system.
Let us suppose that the capture files are placed under /tmp/ss on test system, now create a directory as:

SQL > create directory REPLAY as ‘/tmp/ss’;


After preprocessing followings files will be generated:

wcr_process.wmd, wcr_login.pp, wcr_seq_data.extb, wcr_scn_order.extb , wcr_conn_data.extb

3. Workload Replay:

You have to use an instance which is logically identical to the instance whose workload is captured and need to setup Replay Client (WRC).

– wrc executable has to be run in calibrate mode to estimate the number of replay clients.

$  wrc mode=calibrate replaydir=/tmp/sood

Workload Replay Client: Release – Production on Sat Jul 26 18:49:29 2008

Copyright (c) 1982, 2007, Oracle.  All rights reserved.

Report for Workload in: /tmp/sood



Consider using at least 1 clients divided among 1 CPU(s).

Workload Characteristics:

– max concurrency: 1 sessions

– total number of sessions: 5


– 1 client process per 50 concurrent sessions

– 4 client process per CPU

– think time scale = 100

– connect time scale = 100

– synchronization = TRUE

– Initialize Replay Data:

Initializing replay loads the metadata into tables required for database replay.


– Put the database in “PREPARE REPLAY” mode as:


To check the status of replay use:

SQL > select name,status from  dba_workload_replays;

NAME                 STATUS

——————– —————————————-

REPLAY_1             PREPARE

– Start the replay client:

$ wrc  replaydir=/tmp/sood

Workload Replay Client: Release – Production on Sat Jul 26 22:12:35 2008

Copyright (c) 1982, 2007, Oracle.  All rights reserved.

Wait for the replay to start (22:12:35)

– Start the replay as:


Check the status of the replay as:

SQL> select name,status from  dba_workload_replays;

Initially it will show :

NAME                 STATUS

——————– —————————————-

REPLAY_1             IN PROGRESS

And after that it will be shown as completed.

– Once the status is completed finish the replay as:


To generate the report of the replay in HTML format you need to run :


My_Report  CLOB;





January 12, 2009 - Posted by | oracle

No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: